From the course: vSphere 6.7 Professional Part 02: Managing Storage
Unlock this course with a free trial
Join today to access over 22,600 courses taught by industry experts.
Demo: Storage port bindings and multipathing policies - vSphere Tutorial
From the course: vSphere 6.7 Professional Part 02: Managing Storage
Demo: Storage port bindings and multipathing policies
- [Instructor] In this video I'll show you some storage configuration tasks that you may need to perform on your VMFS data stores. So, in our environment I'm going to go to hosts and clusters here and here's my first ESXi host. I'm going to click on configure. Now in an earlier video we created an iSCSI software adapter which we can see right here and on the second host we did the same thing. We created an iSCSI software adapter and we configured dynamic discovery to allow it to discover the LUNs that are available on this storage array. So, this is our target. This is the storage array. Storage adapter of the ESXi host that's also called an initiator. So, now I've got this target identified and we discovered a group of LUNs as shown here under devices, that were reachable on that storage array. Let's click on the network port binding tab and on the network port binding tab you can see I haven't configured…
Contents
-
-
-
Storage performance overview17m 22s
-
(Locked)
VMFS and NFS datastores11m 17s
-
(Locked)
NFS3 and NFS4.1 datastores with ESXi 6.74m 37s
-
(Locked)
Demo: Create an NFS datastore8m 22s
-
(Locked)
Introduction to iSCSI3m 21s
-
(Locked)
Connecting hosts and storage with software iSCSI1m 33s
-
(Locked)
Demo: Software iSCSI storage config6m 32s
-
Demo: Create a vSphere 6.7 VMFS datastore11m 8s
-
(Locked)
Demo: Expand a VMFS datastore6m 7s
-
(Locked)
Demo: Storage port bindings and multipathing policies9m 30s
-
(Locked)
Dependent hardware iSCSI and ESXi 6.71m 23s
-
(Locked)
Independent hardware iSCSI and ESXi 6.71m 33s
-
-