Join Ellery Connell for an in-depth discussion in this video Finishing the soda can, part of Modeling for Product Visualization in MODO.
In this video, we're going to take the basic can shape and add in the details of …the lip on the top, the indents, also on the top of the can, and the indent on the bottom. …And we'll look at how adding these details is going to affect and pull on …the existing surface of your mesh. And how to make sure you make good …compensations that will keep your shape true to the original form. …So, if you'd like to follow along, you can open up the basic can one LXO file, …and you can follow along from here. So, let's start up here at the top with …the lip on the can. So, I'm going to zoom in here on the …side, and I'm going to select this entire row of edges here.…
So select 2 polygons and press L, and I'm going to bevel these outward slightly. …This is going to be pretty slight and then I'm going to bevel again and I'm …going to scale these ones in relatively far. …And the adjustment that I'm making with this secondary bevel is the overall …rounded shape here. And you can see, I've gotten a little bit …
- Intro to 3D for product visualization
- Benefits of polygonal modeling
- Polygonal modeling techniques
- Modeling with SubDs and PSubs
- Sculpting concepts and retopology
- Setting the scene
- Building geometry for particle generation
- Particle generation tools
- Using blobs
Skill Level Intermediate
1. Getting Started
Using the included files1m 6s
2. Polygonal Modeling
3. Modeling with SubDs and PSubs
4. Sculpting Concepts and Retopology
5. Setting the Scene
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.