- Inputting styling data (the A side)
- Defining the parting surface
- Creating the B side
- Adjusting part thickness
- Creating bosses and ribs
- Draft analysis
- Adjusting wall thickness
- Final fillets to represent the real-world shape
Skill Level Intermediate
- [Steven] Designing a part is one thing, designing a part so it can be injection molded is altogether a different beast. With things like fit, finish, and ease of assembly to keep in mind you're going to need a formulaic method of design that makes sure your final part is moldable. First, you create tooling direction, a parting surface and some key parameters up front. Then you design your molded part off of these critical inputs. If you need to learn the basics of designing an injection molded part, then join me, Steven Marjieh, CEO of Class A Servicing in my LinkedIn Learning Course all about injection molded design in CATIA.
Rapid Prototyping for Product Designwith Gabriel Corbett1h 38m Intermediate
Siemens NX: Design for Injection Moldingwith Steven Marjieh1h 5m Intermediate
1. Initial Inputs
2. Desiging Your Part
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.