This video presents the first things that should be done with a fresh installation of Windows Server 2016. Using the interface of the Desktop Experience, TCP/IP is configured and a computer name is assigned. Best practices in server naming conventions are briefly introduced and settings to manage the clock are explained.
- [Instructor] You may have noticed several things not asked…or answered during the installation of Server 2016.…Two of the most important are the computer's name…and it's network address.…These should really be the first things you set…on a newly installed server.…Personally, I recommend that you attend to these…even before worrying about setting the clock.…We'll take a look at the network address first.…TCPIP is the protocol of choice for the internet…and even the smallest of networks,…so you can be assured that IP addresses…are the types of addresses that you're going to be using…on your network for some time.…
I'm going to continue using my planning worksheet…to note the IP configuration for this server…with a minimum of four things,…an address, a mask, a default gateway, and a name server.…I've obtained this information from my network architect…and I'm going to add it to my planning worksheet…so that I'll have it to apply to my server.…So here we are, we're back on our Windows Server…that we installed with the desktop experience,…
AuthorScott M Burrell
- Installing from a disk or image
- Using the Desktop Experience
- Installing Windows Server from a network
- Working with command-line IPv4 vs. IPv6
- NIC teaming
- Managing roles
- Adding features
- Managing storage
- Working with virtual hard disks and remote volumes
Skill Level Beginner
1. The Install
2. Configure Network Environment
3. Manage Roles and Features
4. Manage Storage
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.