Load balancing modes and teaming modes for NIC teaming in Windows Server 2016 are explored, with a comparison of preferred configurations for server scenarios.
- [Instructor] The last segment closed…with a Switch Independent NIC Team…set up on a virtual machine…functioning as a file server.…You will recall that as we set that up,…under the additional properties,…some of the options were grayed out…and weren't available to us…because we're setting this up on a virtual machine,…rather than on physical hardware.…I want you to think back on the descriptions…of how the different load balancing modes worked.…
Address hashing funneled all of the inbound traffic…through a single interface,…and in Hyper-V, each virtual machine…had its own dedicated, separate connection.…The next teaming mode options that we're…going to look at are for times when those two scenarios…just don't cover what you need.…Let's say, for example, our file server…deals with lots of uploads as well as downloads.…The saving of new files would all be considered…inbound traffic,…and the switch-independent team would shove…most of those through one adapter.…
In the Hyper-V scenario, it's possible…that one of your virtual machines…
AuthorScott M Burrell
- Configuring a network interface controller team
- Switching embedded teaming
- Remote enabled direct memory access NICs
- Configuring virtual machine queue
- Enabling and configuring SR-IOV
- Understanding software-defined networks (SDN)
- Reviewing SDN network requirements and deployment scenarios
Skill Level Intermediate
1. High-Performance Network Interfaces
2. High-Performance SMB Environments
3. High-Performance Virtual Networks
4. Software-Defined Networks
5. Software-Defined Virtual Networks
6. Gateways and Firewalls
Next steps1m 11s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.