Join Jim LaPier for an in-depth discussion in this video Create a basic roof, part of Learning Vectorworks (2014).
…Now that all of our walls are drawn, we can cover our house with a roof.…Again, we'll create a new design layer to hold the roof elements.…I'll go to Tools > Organization > Design Layers, and select floor two and hit New.…I'll call this roof, and say okay.…I'll make sure that the layer wall height is set to zero and…the elevation is twenty one foot four and say okay.…Now, I'm going to turn scan two invisible and say okay.…
In the layer options make sure that Show, Snap, and Modify Others is turned on.…This will allow us to use the Floor two exterior walls as the base for our rood.…To create the roof, we're going to use a closed polygon to define our roof shape.…Select the 2D polygon tool, make sure that the outer boundary mode is selected and…draw a circle around the outside of our house.…We've just created a closed 2D polygon on the roof layer.…Now, we'll go to AEC and click Create Roof.…
Here, we have all of the options for our roof.…For this particular instance, I'm going to set the roof pitch to four to 12 and…
- Setting up your workspace
- Working with classes and layers
- Entering values
- Working with geometry
- Creating 3D objects
- Modeling architecture
- Texturing and lighting
- Adding annotations
- Creating viewports
- Printing and sharing
Skill Level Appropriate for all
AutoCAD 2015 Essential Trainingwith Scott Onstott8h 35m Beginner
AutoCAD Architecture Essential Trainingwith Paul F. Aubin7h 27m Intermediate
1. The Interface
2. Environment Conventions
3. Basic Geometry
4. Basic 3D Shapes
5. Architectural 3D Modeling
8. Viewports and Sheets
9. Printing and Sharing
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.