- Reading electrical schematics
- Building circuits on breadboards
- Reviewing types of static and variable resistors
- Reading resistor color codes
- Measuring resistance with a DMM
- Measuring resistive sensors with an Arduino microcontroller
- Making electrical signal measurements with an oscilloscope
- Measuring AC voltage with a DMM
- Understanding the time domain and frequency domain
- Designing passive low-pass and high-pass filters
- Reviewing reactive RC and RL circuits
- The relationship between capacitors and inductors
Skill Level Beginner
- To build any electronic circuit, you'll need some combination of three basic components, resistors, capacitors, and inductors. It's easy to look at an electronic schematic and follow along to assemble a circuit with those parts, but if you want to design your own circuits or debug problems in an existing one, you need to understand what each of those components can actually do. I'm Barron Stone, and I'm an electrical engineer who likes to keep things as simple as possible. In this course, I'll show you how to build basic circuits using resistors, capacitors, and inductors.
I'll describe how each component works from a practical standpoint, to understand how they affect electrical properties like voltage and current. And as I show you common circuits that use those components, I'll explain why they're used, so you can recognize when to use the resistor or a capacitor or an inductor in your own design. This course will look at the differences between alternating current and direct current. You'll see how all electrical signals, like the signal that's sending my voice to your speakers right now, they're all just a combination of simple components called sinusoids.
I'll show you how to build filter circuits, so you can modify electrical signals by selectively removing certain parts that make up the signal. (unfiltered electronic music) (muffled electronic music) And since we'll be working with electrical signals, we'll need a way to view them. So I'll show you how to use an oscilloscope, which is one of the most useful tools for working with electronics. If you're ready to start, grab your parts, and let's build some circuits.
Learning to use MakerBot 3D Printerswith Kacie Hultgren1h 5m Intermediate
Learning Arduino: Pulse Width Modulationwith Rae Hoyt1h 16m Intermediate
1. Building Circuits
Read electrical schematics6m 25s
3. Resistive Circuits
4. Oscilloscope Measurements
6. Alternating Current
7. Electrical Signals
8. Reactive Circuits
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.