From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Placing the pins - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Placing the pins
- [Instructor] Chapter five O seven we're going to be placing some of these pins, and even though we got this one in here we've still got the generic pin in position. So what we're going to do is rename this and save it as a new pin, and then we're going to inbed it into this component and it'll appear magically at this site. And we'll do a similar thing down here and then I'm going to leave you to do the rest of them with the exception of this which we'll do together. And then we're pretty much done. So we got to few more to pop in. We've got one that goes across there and we have one that goes there. Okay we've also got this brace thing that comes in around right here. So we'll do all that in a few exercises further down the line to complete this lamp. But first we'll deal with this pin and creating new pins, renaming them, So first up we need to make a copy of it. So just do the old move tool copy technique and then we can select this and we should see it saying generic pin. on it…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
The upper armature explained3m 59s
-
(Locked)
Connecting the bulb and bulb holder4m 5s
-
(Locked)
Connecting the shade to the shade holder4m 2s
-
(Locked)
Building the upper armature3m 22s
-
(Locked)
Putting it together4m 32s
-
(Locked)
Making the pins5m 53s
-
(Locked)
Placing the pins5m 24s
-
(Locked)
Making the armature hinge pin3m 56s
-
(Locked)
The final pieces5m 20s
-
-
-