From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Making the swivel connection part - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Making the swivel connection part
- [Instructor] Chapter 107. We are now going to make the Swivel connector part or at least part of it. And we'll finish it off in the next lesson, what we're going to do here is intersect these two profiles. So if you'd been making these as we go along, then you should be at a state something like this. Otherwise, go to the X Files files and load up. open or create local collection and go to the base 01_Base folder and bring in Swivel profile one and Swivel profile two, So I'm just going to move this M on the keyboard, move that slightly further back. And all I'm going to do now is double click on this and push/pull so that the P on the keyboard and double click on this one, push/pull that through that. Okay, so that's what we need to do. Now, these prong heights could be as any heights that they want, this one's going to define the profile in this direction. And then this is going to define it in that direction. What I'm also going to do is make a copy of this, cause I'll show the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
Setting up the template1m 58s
-
Loading the components1m 41s
-
Making the base profile5m 3s
-
Making the base part4m 39s
-
Making the swivel connection profile, part 13m 41s
-
Making the swivel connection profile, part 23m 13s
-
Making the swivel connection part4m 2s
-
Completing the swivel connection5m 25s
-
-
-
-
-
-
-