From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Making the base arm profile - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Making the base arm profile
- Chapter 2 0 2 we're going to make the base arm profile. And this is a tricky one. And we've got to get it spot on. Otherwise things won't work out in a little bit later. So we'll just run through a couple of the bits that are important. And we'll flip over to the pdf to take a look at some of the key dimensions. So here we are. We're on page number 7 of the pdf. This is called the base arm. And we're creating this shape. Okay. Now a couple of things to point out, it kinks in at 70 mil. So it's 8 mil across, it's 355 mil from top to bottom. And then at the very top from 4 mil out, we've got it squared up again. And the important thing is we have 8 mil at that point, and 40 mil at this point. This ties in, then, with the rest of the bits and pieces that we're going to make. Okay, so this critical angle is 3.26 degrees. And hopefully, if we get this right, then everything will work out, all to within a couple of points of a millimeter at least. Okay, so let's go back to the sketch-up…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Investigating the lower armature of the lamp3m 16s
-
(Locked)
Making the base arm profile3m 37s
-
(Locked)
Completing the base arm component4m 17s
-
(Locked)
Making the armature hinge unit parts3m 54s
-
(Locked)
Putting the armature hinge together3m 38s
-
(Locked)
Forming the rear arm body3m 35s
-
(Locked)
Finishing the rear arm body4m 27s
-
(Locked)
Completing the rear arm5m 9s
-
-
-
-
-
-