From the course: SketchUp Pro: Modeling a Lamp
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Completing the base arm component - SketchUp Tutorial
From the course: SketchUp Pro: Modeling a Lamp
Completing the base arm component
- [Instructor] Okay, we're going to complete the base arm component in this lesson. This is Chapter 203, and the first thing we're going to do is just round off these things. Now, I do know these dimensions that we're going to be playing with so it's no point in checking out the PDF. But what we need to do is come in 4 mil because we got a 4-mil round on this end and a 4-mil round on the other end. So I'll use the Tape Measure tool and we'll come in 4. Enter. And then we'll use this 2-point arc and click, click, click and that's going to create that point there so it creates a half circle and then we can use the push-pull just to push-pull these out. So once you've set one, double click the bottom bit and that's done, that bit. Now we can do a similar thing Okay, we'll sit on this face and we've got the line ready for us so click, click, and click. Half circle, P for push-pull, double click and double click so that's that bit done as well. So that's all nicely cleaned up. Now we've…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Investigating the lower armature of the lamp3m 16s
-
(Locked)
Making the base arm profile3m 37s
-
(Locked)
Completing the base arm component4m 17s
-
(Locked)
Making the armature hinge unit parts3m 54s
-
(Locked)
Putting the armature hinge together3m 38s
-
(Locked)
Forming the rear arm body3m 35s
-
(Locked)
Finishing the rear arm body4m 27s
-
(Locked)
Completing the rear arm5m 9s
-
-
-
-
-
-