From the course: Learning SOLIDWORKS xDesign
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Feature tab, part 2 - SOLIDWORKS xDesign Tutorial
From the course: Learning SOLIDWORKS xDesign
Feature tab, part 2
- [Instructor] Now that we've created some initial geometry, we can move on to some of the other features available to us. We can start now by using the Fillet and Chamfer feature, the Hole, Draft feature, and also the Mirror, and Pattern feature. So I'm going to start by adding some fillets. So I'm going to select this face right here, and you see I get a preview automatically. I can also change this to a chamfer just by selecting this drop down and toggling between the two. I'm going to increase this a little bit. And you can see you can propagate along tangent edges or not, just as you did in SOLIDWORKS before. I'm going to go ahead and accept that. Moving on, you know, if I want to go back and change that to a chamfer, I can still edit it just by going back to Edit feature, and toggling that chamfer feature option. I'm going to reduce that size down and hit okay. To create a hole, you've got to have an existing sketch with some points on it. So I'm going to use that sketch I made…
Contents
-
-
-
-
-
Sketch tab, part 13m 54s
-
(Locked)
Sketch tab, part 25m 42s
-
(Locked)
Feature tab, part 17m 4s
-
(Locked)
Feature tab, part 24m 38s
-
(Locked)
Feature tab, part 33m 30s
-
(Locked)
Surface tab5m 12s
-
(Locked)
Assembly3m 30s
-
(Locked)
Tools tab6m 17s
-
(Locked)
Manage tab, part 13m 31s
-
(Locked)
Manage tab, part 21m 51s
-
(Locked)
View tab5m 42s
-
-
-