Learn about creating an assembly.
- [Instructor] In this video, we're going to go ahead…and start creating an assembly, and then we're going to make…in-context features to relate the two together.…So I'm going to start with this base piece here,…and I'm going to right-click on it,…and then click on Make Assembly from Part.…I'm going to use the Lynda Assembly,…and go ahead and start that up.…Choose that part right there, and click OK.…Now I have an assembly set up here.…I'm going to click on Tile Horizontally,…and I'm going to drag this part here into my assembly.…And once I have that, I'm going to go ahead and open it up.…
I'm going to basically just put this piece…directly over the other piece and then create an assembly.…So I'll click on Mate.…I'm going to choose the outside of this circle here…with the outside of that one there, click OK,…and then we're going to click on the top surface here…and the bottom surface there, and bring those together.…Now what I want is this circle here, this cylinder here,…to be the same size as this cylinder down here,…
Author
Released
2/20/2018- CSWP exam overview
- Working with the sketch tools
- Performing sweeps and lofts
- Smoothing corners with Fillet and Chamfer
- Creating linear and circular patterns
- Designing multibody parts
- Setting mass properties
- Working with materials
- Inserting components
- Setting up reference geometry
- Moving and rotating components
- Working with suppression states
- Using a design table to build configurations
- Establishing standard drawing views
- Segment 1: Modeling parts
- Segment 2: Modifying and configuring parts
- Segment 3: Building assemblies
Skill Level Intermediate
Duration
Views
Related Courses
-
Cert Prep: Certified SOLIDWORKS Associate
with Gabriel Corbett1h 44m Intermediate -
Cert Prep: SOLIDWORKS Sheet Metal
with Gabriel Corbett1h 34m Intermediate -
Cert Prep: SOLIDWORKS Surfacing (2017)
with Gabriel Corbett1h 13m Intermediate
-
Introduction
-
Welcome1m 33s
-
-
1. The CSWP Exam
-
Exam information2m 14s
-
Exam-taking techniques5m 43s
-
2. Exam Skills
-
Sketch entities8m 1s
-
Sketch tools3m 44s
-
Sketch relations2m 30s
-
Boss and Cut features2m 28s
-
Revolve3m 3s
-
Sweeps and lofts3m 21s
-
Fillets and chamfers2m 3s
-
Draft3m 3s
-
Shell1m 46s
-
Hole Wizard4m 47s
-
Linked dimensions2m 46s
-
Equations3m 30s
-
Mirror3m 31s
-
Multibody parts2m 33s
-
Rib3m 20s
-
Feature scope1m 35s
-
Mass properties2m 25s
-
Materials1m 13s
-
Inserting components3m 28s
-
Restraints1m 31s
-
Standard mates6m 58s
-
Reference geometry4m 11s
-
In-context features4m 24s
-
Suppression states1m 33s
-
Move and rotate components2m 31s
-
Assembly features1m 54s
-
External references2m 1s
-
Design tables6m 20s
-
Drawing view types6m 6s
-
-
3. Segment 1: Part Modeling (70 Minutes)
-
4. Segment 2: Part Modifications and Configurations (50 Minutes)
-
Modify a cutout4m 9s
-
Adjust thicknesses2m 14s
-
Remove features from parts1m 39s
-
Modify complex parts3m 32s
-
Add/switch configurations2m 37s
-
5. Segment 3: Assemblies (80 Minutes)
-
Create a coordinate system3m 38s
-
Modify physical properties2m 38s
-
Gear Mate2m 28s
-
Path Mate2m 34s
-
-
Conclusion
-
Next steps52s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: In-context features