Learn about creating custom coordinate systems.
- [Instructor] All right, now that we've added our part…into our assembly,…we're ready to start doing…the machine operations,…but before we do that…we have to establish our work coordinate system,…and that's going to be where we're going to set…the origin of this part…and the relationship to the machine home position.…So most the time on most machines…you can use a G54 or G55, 56 and so on,…positioned to tell the machine…where this component is inside of the machine.…Now different machines use different systems,…like a Fadal, for instance,…might use an E value,…like E1234 and so on.…
Other machines might use, like, a P position,…so it would be, like,…a G54-P100, for instance.…Bu it really depends on who the manufacturer…of the machine is…and what work coordinate system methodology they're using,…but it doesn't really matter.…Figure out which system you're using…and then establish that component.…So a couple recommendations here.…One is you generally want to use some point…on this back edge here, right?…Because this face of the jaw doesn't move…
- Loading models and assemblies
- Stock setup
- Choosing the WCS and running multiple parts at once
- Building custom tools
- Running a drilling operation
- 2D milling operations
- Modifying your post processor
- Simulating the milling operations
Skill Level Intermediate
SOLIDWORKS 2017 Essential Trainingwith Gabriel Corbett6h 10m Intermediate
Modeling a Motorcycle Engine with SOLIDWORKSwith Leon van den Heever1h 49m Intermediate
1. HSMXpress Job Setup
2. Tools/Tool Library
3. Drilling Operations
4. 2D Milling Operations
5. Simulation and Post Processing
Next steps1m 33s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.