- [Instructor] One of the questions you may be asked…on the exam is to work with a shell type feature.…And you might be asked to either remove it…or push it to the other side of the part…or something along those lines.…In this example here, I'm going to show you…we've got a shell feature on this side of the part…and on the other side we have the same thing.…We have a mirror.…So if I roll that mirror back,…you can see I'm just shelling one half of the part.…Now if, for instance, they ask you to remove the shell…on one side of the part.…We have of course, several different ways we could do that.…
And you might be thinking, well I've got to do is remove…or move that mirror feature up in front of that shell…and everything should be just fine.…So let's go ahead and try that first.…Grab the mirror, let's roll that back…and push it up above it.…And the only problem is, is it worked,…but now it's shelling the entire part, right?…So now we don't have a one solid half of the part…and one shelled part.…We have the entire part being shelled from one direction…
Author
Released
2/20/2018- CSWP exam overview
- Working with the sketch tools
- Performing sweeps and lofts
- Smoothing corners with Fillet and Chamfer
- Creating linear and circular patterns
- Designing multibody parts
- Setting mass properties
- Working with materials
- Inserting components
- Setting up reference geometry
- Moving and rotating components
- Working with suppression states
- Using a design table to build configurations
- Establishing standard drawing views
- Segment 1: Modeling parts
- Segment 2: Modifying and configuring parts
- Segment 3: Building assemblies
Skill Level Intermediate
Duration
Views
Related Courses
-
Cert Prep: Certified SOLIDWORKS Associate
with Gabriel Corbett1h 44m Intermediate -
Cert Prep: SOLIDWORKS Sheet Metal
with Gabriel Corbett1h 34m Intermediate
-
Introduction
-
Welcome1m 33s
-
-
1. The CSWP Exam
-
Exam information2m 14s
-
Exam-taking techniques5m 43s
-
2. Exam Skills
-
Sketch entities8m 1s
-
Sketch tools3m 44s
-
Sketch relations2m 30s
-
Boss and Cut features2m 28s
-
Revolve3m 3s
-
Sweeps and lofts3m 21s
-
Fillets and chamfers2m 3s
-
Draft3m 3s
-
Shell1m 46s
-
Hole Wizard4m 47s
-
Linked dimensions2m 46s
-
Equations3m 30s
-
Mirror3m 31s
-
Multibody parts2m 33s
-
Rib3m 20s
-
Feature scope1m 35s
-
Mass properties2m 25s
-
Materials1m 13s
-
Inserting components3m 28s
-
Restraints1m 31s
-
Standard mates6m 58s
-
Reference geometry4m 11s
-
In-context features4m 24s
-
Suppression states1m 33s
-
Move and rotate components2m 31s
-
Assembly features1m 54s
-
External references2m 1s
-
Design tables6m 20s
-
Drawing view types6m 6s
-
-
3. Segment 1: Part Modeling (70 Minutes)
-
4. Segment 2: Part Modifications and Configurations (50 Minutes)
-
Modify a cutout4m 9s
-
Adjust thicknesses2m 14s
-
Remove features from parts1m 39s
-
Modify complex parts3m 32s
-
Add/switch configurations2m 37s
-
5. Segment 3: Assemblies (80 Minutes)
-
Create a coordinate system3m 38s
-
Modify physical properties2m 38s
-
Gear Mate2m 28s
-
Path Mate2m 34s
-
-
Conclusion
-
Next steps52s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Work with Shell modifications