Join Gabriel Corbett for an in-depth discussion in this video The Swept Surface tool, part of SOLIDWORKS: Surfacing.
To create a Swept Surface,…we'll need two basic ingredients.…One is a profile,…and the other is a path.…This again is very similar to…what we normally do in a Solid Sweep.…In this case here, I have a sketch,…and I want to create a plane at the very end of this sketch.…And then I'll create a shape on there.…So, a very easy way to do that…is to choose the line itself,…hold down 'Control'…and choose the end point.…Then come up to 'Reference Geometry'…and click on 'Plane'.…And what it does is it puts a plane…directly at the very end of the line normal to the point.…
There it is.…Click on 'Okay',…and then I'm gonna use that plane there,…to start a sketch.…Notice I've been going up to 'Sketch'…starting a sketch up here.…But you can also very easily start a sketch…by clicking on the plane,…and going down here and starting a sketch.…Once you have that,…I'm gonna create another spline.…This one's gonna be here.…And it's just a little spline.…And I'm gonna make it directly below the existing spline.…There's no need to actually connect the two together,…
- Defining planes for surface creation
- Creating splines and 3D curves
- Making revolved surfaces
- Building boundary and lofted surfaces
- Offsetting a surface
- Trimming and untrimming surfaces
- Adding fillets
- Fixing corners
- Deleting, moving, and replacing faces
Skill Level Intermediate
SOLIDWORKS: Sheet Metal Designwith Gabriel Corbett2h 55m Intermediate
SOLIDWORKS Rendering with PhotoView 360with Gabriel Corbett1h 50m Intermediate
Designing a Sheet Metal Enclosure with SOLIDWORKSwith Gabriel Corbett2h 31m Intermediate
1. Sketching for Surfaces
2. Surface Creation Tools
3. Surface Modifiers
4. Using Surfaces with Solids
5. Direct Editing Tools
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.