Join Leon van den Heever for an in-depth discussion in this video Shelf, part of Modeling a Cabinet with SOLIDWORKS.
- Next we will quickly mirror the drawer support…from the previous session,…and then also add the shelf for our cabinet.…So, heading on over to SOLIDWORKS,…let's edit the drawer support component.…So edit part, and we'll take our extrude,…and then create a mirror.…So if we go to features, linear pattern,…and fly-out menu, and do a mirror command again.…
Make sure that we are using bodies,…and not features, so right-click and clear that.…Go to the body section, select it from the graphics view,…and we're going to mirror again…about the right plane of the active component.…Turn off the merge and show the full preview…if you don't see it in the graphics view.…And OK to complete the command.…Let's exit the edit mode,…and then go to insert new part,…and then let's create a part for our shelf.…
So name it shelf, and save that.…Select the front plane, exit out of the sketch,…and make sure that we then right-click…on the shelf and start a new sketch.…Now notice that I've just used the shelf thickness.…That's okay. For now we'll just keep going.…
AuthorLeon van den Heever
- Setting up the model and adding components
- Creating the main structure of the cabinet
- Modeling the door
- Building the drawer
- Testing the model
Skill Level Advanced
Modeling a Motorcycle Engine with SOLIDWORKSwith Leon van den Heever1h 49m Intermediate
SOLIDWORKS Rendering with PhotoView 360with Gabriel Corbett1h 50m Intermediate
Modeling a Bicycle Frame with SOLIDWORKSwith Leon van den Heever42m 34s Intermediate
1. Establishing Our Workflow
2. The Main Structure
3. Door and Drawer
4. Finalizing and Testing
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.