Explore the method for selecting and working with tools.
- [Instructor] In this video,…we're going to be selecting tools for machining this block.…Now we have jumped ahead a little bit,…because we've already selected one tool…and done one operation with it.…In fact, in the previous couple videos,…we've actually even posted that out already.…But now we're going to rewind a little bit,…and actually select that tool…or the other tools for the job.…To do that there's a couple different ways.…The first way is to actually select the operation…and then just kind of add the tool on the fly.…So I'm going to choose maybe like a drilling operation,…right up here, choose drill,…and I'm going to choose from the library,…notice I don't have any other operations.…
Not right now, it's saying that I'm going to be using this…N mill for the drilling operation, which is not true,…so I need to select a different operation.…So come down here, I'm going to choose the inch aluminum,…and see if we can't find a spot drill.…So go through all the drills, the center drills,…and here's a spot drill,…
Author
Released
1/25/2018- Loading models and assemblies
- Stock setup
- Choosing the WCS and running multiple parts at once
- Building custom tools
- Running a drilling operation
- 2D milling operations
- Modifying your post processor
- Simulating the milling operations
Skill Level Intermediate
Duration
Views
Related Courses
-
Modeling a Motorcycle Engine with SOLIDWORKS
with Leon van den Heever1h 49m Intermediate -
Learning SOLIDWORKS (2016)
with Gabriel Corbett1h 59m Beginner
-
Introduction
-
Welcome58s
-
Using the exercise files1m 30s
-
Downloading the software3m 17s
-
-
1. HSMXpress Job Setup
-
Touring the interface4m 19s
-
Stock setup4m 58s
-
Fixture setup6m 2s
-
Work coordinate system5m 50s
-
Machine setup3m 52s
-
Post processing5m 13s
-
-
2. Tools/Tool Library
-
Selecting tools5m 2s
-
Creating custom tools4m 40s
-
Tool libraries3m 2s
-
-
3. Drilling Operations
-
4. 2D Milling Operations
-
Face6m 2s
-
2D pockets5m 33s
-
2D Contour5m 51s
-
Slot3m 57s
-
Thread milling9m 2s
-
Circular milling1m 58s
-
Bore milling4m 34s
-
Trace2m 26s
-
-
5. Simulation and Post Processing
-
Simulating the operations4m 22s
-
Cut and paste operations2m 20s
-
Time study4m 15s
-
Generate toolpath3m 11s
-
Post processor options3m 3s
-
Utilities/setup sheets2m 2s
-
-
Conclusion
-
Next steps1m 33s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Selecting tools