From the course: Cert Prep: SOLIDWORKS Weldments
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Profile alignment - SOLIDWORKS Tutorial
From the course: Cert Prep: SOLIDWORKS Weldments
Profile alignment
- [Instructor] In this example, we're going to be looking at aligning a weldment profile. So you can see here we've got already a weldment created and you can see it's this line right here which is defining that basic shape at the bottom. And then I've got a 3D sketch with a couple of members coming up here, which I want to create a weldment from. So I'm going to go over here to weldments. Go ahead and create a structural member. I'm going to go ahead and use that same P one profile, click on that one right here. And you can see here that it's totally not aligned, right. That's not what we want. So, the first thing I want to do is I want to locate the profile, and I want to use this corner right there. So that's where I want to use it. And then I want to click on this alignment and I want to choose that line right there. Notice it does align to that. The problem is I aligned it and it spun it around so I'm using a different corner. So let's go ahead and try locating that profile one…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
(Locked)
Weldment profile creation4m 3s
-
(Locked)
Placing the weldment profile in the weldment profile library6m 5s
-
(Locked)
Basic and advanced weldment part creation5m 51s
-
(Locked)
Locating a weldment profile3m 19s
-
(Locked)
Weldment corner modification2m 17s
-
(Locked)
Profile alignment1m 35s
-
(Locked)
Placing gaps at corners and segment intersections1m 58s
-
(Locked)
End caps2m 2s
-
(Locked)
Gussets1m 37s
-
Weldment part modification2m 8s
-
(Locked)
Using the Trim/Extend command5m 24s
-
(Locked)
3D sketch creation4m 27s
-
(Locked)
Cut list folder management in the weldment part2m 13s
-
Cut list creation in the weldment drawing2m 33s
-
(Locked)
-
-