Learn how to select your post processing options.
- [Instructor] We're finally here.…We're ready to post process our job…and actually see some G code that we can actually run…in a CNC machine.…Now, to recap what we've done so far.…First things first, is we created an assembly…inside of SolidWorks.…We've brought in some fixtures, like a vise,…or multiple vises, and then brought in our part.…Then, we took that part, and we added some stock…around that part.…Then, we created a coordinate system…on the upper left-hand corner.…And then, we established that as our G54 position.…Now, we're pretty much ready to output the code.…
If you also remember, in the last video, we did establish…that we have multiple work offsets here, so, it's going…to actually output the code four times for every one…of these individual vises.…Let's go ahead and see what happens.…Before we do that though, let's go back over to the job…itself and just kind of recap.…Over here click on Edit.…We're doing a milling operation.…Our model is the inside piece, which is the stock…from the inside.…Then we have the actual outside block,…
- Loading models and assemblies
- Stock setup
- Choosing the WCS and running multiple parts at once
- Building custom tools
- Running a drilling operation
- 2D milling operations
- Modifying your post processor
- Simulating the milling operations
Skill Level Intermediate
SOLIDWORKS 2017 Essential Trainingwith Gabriel Corbett6h 10m Intermediate
Modeling a Motorcycle Engine with SOLIDWORKSwith Leon van den Heever1h 49m Intermediate
1. HSMXpress Job Setup
2. Tools/Tool Library
3. Drilling Operations
4. 2D Milling Operations
5. Simulation and Post Processing
Next steps1m 33s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.