Learn about making modifications to the part.
- [Instructor] Another question you may see in the exam…is to take a part we've already created…and then add some complexity, like adding a feature.…Maybe it's a hole, maybe it's a boss,…maybe it's modifying the entire part,…or maybe it's a combination of all of those.…You might have to make the part a little bigger…or modify the equations, then add something to it.…So in this case here, I'm going to add…a couple of bosses.…So I'm going to go over here.…Now instead of starting right over here,…notice I've got this mirror feature.…I'm going to go ahead and roll the history bar back…before that, so I'm only working on…one half of my part.…
I'm going to come over here and click on…the surface right there.…Click on Sketch.…Starting a sketch here, I'm going to just go ahead…and draw a circle here and a circle down here.…Because I do want to create a through-hole…in the center of this boss, I'm going to create that…as a secondary feature.…I always recommend creating solids first…and then cutting the holes last,…because a lot of times in the exam,…
Author
Released
2/20/2018- CSWP exam overview
- Working with the sketch tools
- Performing sweeps and lofts
- Smoothing corners with Fillet and Chamfer
- Creating linear and circular patterns
- Designing multibody parts
- Setting mass properties
- Working with materials
- Inserting components
- Setting up reference geometry
- Moving and rotating components
- Working with suppression states
- Using a design table to build configurations
- Establishing standard drawing views
- Segment 1: Modeling parts
- Segment 2: Modifying and configuring parts
- Segment 3: Building assemblies
Skill Level Intermediate
Duration
Views
Related Courses
-
Cert Prep: Certified SOLIDWORKS Associate
with Gabriel Corbett1h 44m Intermediate -
Cert Prep: SOLIDWORKS Sheet Metal
with Gabriel Corbett1h 34m Intermediate -
Cert Prep: SOLIDWORKS Surfacing (2017)
with Gabriel Corbett1h 13m Intermediate
-
Introduction
-
Welcome1m 33s
-
-
1. The CSWP Exam
-
Exam information2m 14s
-
Exam-taking techniques5m 43s
-
2. Exam Skills
-
Sketch entities8m 1s
-
Sketch tools3m 44s
-
Sketch relations2m 30s
-
Boss and Cut features2m 28s
-
Revolve3m 3s
-
Sweeps and lofts3m 21s
-
Fillets and chamfers2m 3s
-
Draft3m 3s
-
Shell1m 46s
-
Hole Wizard4m 47s
-
Linked dimensions2m 46s
-
Equations3m 30s
-
Mirror3m 31s
-
Multibody parts2m 33s
-
Rib3m 20s
-
Feature scope1m 35s
-
Mass properties2m 25s
-
Materials1m 13s
-
Inserting components3m 28s
-
Restraints1m 31s
-
Standard mates6m 58s
-
Reference geometry4m 11s
-
In-context features4m 24s
-
Suppression states1m 33s
-
Move and rotate components2m 31s
-
Assembly features1m 54s
-
External references2m 1s
-
Design tables6m 20s
-
Drawing view types6m 6s
-
-
3. Segment 1: Part Modeling (70 Minutes)
-
4. Segment 2: Part Modifications and Configurations (50 Minutes)
-
Modify a cutout4m 9s
-
Adjust thicknesses2m 14s
-
Remove features from parts1m 39s
-
Modify complex parts3m 32s
-
Add/switch configurations2m 37s
-
5. Segment 3: Assemblies (80 Minutes)
-
Create a coordinate system3m 38s
-
Modify physical properties2m 38s
-
Gear Mate2m 28s
-
Path Mate2m 34s
-
-
Conclusion
-
Next steps52s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Modify the part and add complexity