- [Instructor] Another type of question you may see…on the exam is some type of a cutout or a major part change…that's going to generally cause a bunch of features to fail.…And they're testing to see if you know how to go back…through the tree and solve the issues inside of that part.…So in this example here I've got this part,…which is the 4.2-1, which is the part…we've been pretty much working with.…And then we want to modify to this version over here.…So instead of this long slot,…we actually just have a hole.…And that's the modification we need to make.…
So we're going to go ahead and I'll show you…how I would go about doing that.…So right over here is the part.…So we need to go back and figure out…where this hole is created.…So if I click on the actual feature itself,…you can see that right over here, it's a circular pattern.…Here's my original shape.…Now if I click on the history bar, I can roll that feature…all the way back to that original shape right there…and click on it and click on modify that sketch.…
Author
Released
2/20/2018- CSWP exam overview
- Working with the sketch tools
- Performing sweeps and lofts
- Smoothing corners with Fillet and Chamfer
- Creating linear and circular patterns
- Designing multibody parts
- Setting mass properties
- Working with materials
- Inserting components
- Setting up reference geometry
- Moving and rotating components
- Working with suppression states
- Using a design table to build configurations
- Establishing standard drawing views
- Segment 1: Modeling parts
- Segment 2: Modifying and configuring parts
- Segment 3: Building assemblies
Skill Level Intermediate
Duration
Views
Related Courses
-
Cert Prep: Certified SOLIDWORKS Associate
with Gabriel Corbett1h 44m Intermediate -
Cert Prep: SOLIDWORKS Sheet Metal
with Gabriel Corbett1h 34m Intermediate
-
Introduction
-
Welcome1m 33s
-
-
1. The CSWP Exam
-
Exam information2m 14s
-
Exam-taking techniques5m 43s
-
2. Exam Skills
-
Sketch entities8m 1s
-
Sketch tools3m 44s
-
Sketch relations2m 30s
-
Boss and Cut features2m 28s
-
Revolve3m 3s
-
Sweeps and lofts3m 21s
-
Fillets and chamfers2m 3s
-
Draft3m 3s
-
Shell1m 46s
-
Hole Wizard4m 47s
-
Linked dimensions2m 46s
-
Equations3m 30s
-
Mirror3m 31s
-
Multibody parts2m 33s
-
Rib3m 20s
-
Feature scope1m 35s
-
Mass properties2m 25s
-
Materials1m 13s
-
Inserting components3m 28s
-
Restraints1m 31s
-
Standard mates6m 58s
-
Reference geometry4m 11s
-
In-context features4m 24s
-
Suppression states1m 33s
-
Move and rotate components2m 31s
-
Assembly features1m 54s
-
External references2m 1s
-
Design tables6m 20s
-
Drawing view types6m 6s
-
-
3. Segment 1: Part Modeling (70 Minutes)
-
4. Segment 2: Part Modifications and Configurations (50 Minutes)
-
Modify a cutout4m 9s
-
Adjust thicknesses2m 14s
-
Remove features from parts1m 39s
-
Modify complex parts3m 32s
-
Add/switch configurations2m 37s
-
5. Segment 3: Assemblies (80 Minutes)
-
Create a coordinate system3m 38s
-
Modify physical properties2m 38s
-
Gear Mate2m 28s
-
Path Mate2m 34s
-
-
Conclusion
-
Next steps52s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Modify a cutout