From the course: SOLIDWORKS: Advanced Sketching
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Mirror - SOLIDWORKS Tutorial
From the course: SOLIDWORKS: Advanced Sketching
Mirror
- [Instructor] When sketching symmetric features, it's always a good idea to use the mirror feature in sketch. So you always have to start with something to mirror about, so I've got a center line in here that starts at my origin. I'm going to mock up a symmetric plate that I'm going to be using. So, I'm going to just sketch an open ended plate on this side, with a couple of holes in it, and we'll add in some dimensions as well, to locate everything. Okay, I've almost got this fully defined. Alright, at this point I've fully defined this sketch. Everything is in black, it looks good, but it's open ended, and I want to mirror this about this center line. So I'm going to go ahead and turn on the mirror entities feature, and first it asks you what do you want to mirror. So I'm going to go ahead, and without selecting this line, I'm going to draw a box, pulling from right to left to get the green selection, and grab everything. And you can see it grabs all of the entities. Now we're going…
Contents
-
-
-
-
(Locked)
Create a sketch from Selections2m 32s
-
(Locked)
Repair Sketch2m 15s
-
(Locked)
SketchXpert1m 32s
-
(Locked)
Align1m 11s
-
(Locked)
Modify2m 41s
-
(Locked)
Close Sketch to Model1m 52s
-
(Locked)
Check Sketch for features1m 48s
-
(Locked)
Sketch Picture3m 55s
-
(Locked)
Area hatch/fill3m 3s
-
(Locked)
Mirror2m 30s
-
(Locked)
-
-
-
-
-
-
-