Join Leon van den Heever for an in-depth discussion in this video Front frame, part of Modeling a Cabinet with SOLIDWORKS.
- Next, we will create the front frames…for our decorative components,…so heading on over to the, back into SOLIDWORKS.…Alright, let's firstly start again by editing our Skeleton,…so that we can add additional planes.…So, I'm going to have the base edge width…and the side fronts active, along with the,…sorry, then, just directly from the side front,…we can actually derive another plane, pulling it forward.…
I'm gonna set the settings to 20 millimeters…in the properties.…Enter to complete the command.…And then, for the front frame width,…we will take it from the base edge,…derive it from there inwards,…and we can set this to a distance of,…let's go for 60 millimeters with that.…OK to complete the command, or just Enter on your keyboard.…I'm also going to show the top…and the top thickness planes,…and then let's rename the newly-created planes.…
So, we're gonna have Front Frame Thickness.…And then, we will have the Frame,…or Front Frame Width.…Alright, that will do.…I'm going to exit the Skeleton's edit mode.…Let's go to Insert Component, New Part.…
AuthorLeon van den Heever
- Setting up the model and adding components
- Creating the main structure of the cabinet
- Modeling the door
- Building the drawer
- Testing the model
Skill Level Advanced
Modeling a Motorcycle Engine with SOLIDWORKSwith Leon van den Heever1h 49m Intermediate
SOLIDWORKS Rendering with PhotoView 360with Gabriel Corbett1h 50m Intermediate
Modeling a Bicycle Frame with SOLIDWORKSwith Leon van den Heever42m 34s Intermediate
1. Establishing Our Workflow
2. The Main Structure
3. Door and Drawer
4. Finalizing and Testing
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.