Learn about running a facing operation.
- [Instructor] In this movie,…we're going to be looking at…creating a facing operation.…Now a facing operation is generally going to be…the first operation you're going to do…on machining your component or your part.…So to do that,…let's go up here under 2D milling,…and the very first one here is called face,…go ahead and choose that one there.…And by default my tool is not selected,…so I'm going to go head over here to the library…and choose a facing tool.…Now notice we don't really have any tools…that would be really great for facing.…You could use this 5/8 inch in mill,…but you'd be doing a lot of passes.…
So I'm going to go ahead and search through the library…and find a tool that might work out.…So I'm going to go ahead…and just search through here…come down here to inch…and go to aluminum.…Alright, and let's go through here…and see if we can find a face type of tool.…Down here.…I don't really see anything in that category.…Come up here, under by type.…And go over here and say face mill.…And here's a couple face mills.…
Author
Released
1/25/2018- Loading models and assemblies
- Stock setup
- Choosing the WCS and running multiple parts at once
- Building custom tools
- Running a drilling operation
- 2D milling operations
- Modifying your post processor
- Simulating the milling operations
Skill Level Intermediate
Duration
Views
Related Courses
-
Modeling a Motorcycle Engine with SOLIDWORKS
with Leon van den Heever1h 49m Intermediate -
Learning SOLIDWORKS (2016)
with Gabriel Corbett1h 59m Beginner
-
Introduction
-
Welcome58s
-
Using the exercise files1m 30s
-
Downloading the software3m 17s
-
-
1. HSMXpress Job Setup
-
Touring the interface4m 19s
-
Stock setup4m 58s
-
Fixture setup6m 2s
-
Work coordinate system5m 50s
-
Machine setup3m 52s
-
Post processing5m 13s
-
-
2. Tools/Tool Library
-
Selecting tools5m 2s
-
Creating custom tools4m 40s
-
Tool libraries3m 2s
-
-
3. Drilling Operations
-
4. 2D Milling Operations
-
Face6m 2s
-
2D pockets5m 33s
-
2D Contour5m 51s
-
Slot3m 57s
-
Thread milling9m 2s
-
Circular milling1m 58s
-
Bore milling4m 34s
-
Trace2m 26s
-
-
5. Simulation and Post Processing
-
Simulating the operations4m 22s
-
Cut and paste operations2m 20s
-
Time study4m 15s
-
Generate toolpath3m 11s
-
Post processor options3m 3s
-
Utilities/setup sheets2m 2s
-
-
Conclusion
-
Next steps1m 33s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Face