Drawing revisions

Revisions are best handled at the part level, and we link our drawings…to that part revision.…The custom properties of the part will generally have some revision property…that we can fill out.…From there we need to make sure our drawing template is linking to that property.…Once we have a revision, we might also want to add a revision table that says,…what has been changed and at what stage.…We have a part here that doesn't have any revision data in it at all.…So we are going to do a little review and add a revision to it. And we'll go back…here to the part and click on the File Properties at the top, and click here and…we want to go to the Revision.…

That's all we are going to add to this one and we are going to add Revision A.…Click on OK, and now we have added that, let's go back to the drawing and we…should show up with Revision A.…Now we want to go up here and add a Revision table.…So anytime we are making a drawing change, we are going to put those…changes into the table.…Now most of the time when you start with a drawing table, we are just going to have --…