Join Leon van den Heever for an in-depth discussion in this video Drawer front, part of Modeling a Cabinet with SOLIDWORKS.
- Next we're going to create the front part of our drawer.…The planes that we'll need is the TopThickness,…the Brace2, the DrawerWidth,…and the FrontFrameThickness planes to be visible.…Let's insert New Part…and let's name this…Drawer front and save.…Select the Front Plane of our top level assembly,…exit the sketch…and right click on the FrontFrameThickness…and let's create a new sketch on that.…
Let's use a center rectangle,…get our rectangle something like this.…And instead of using collinear relations…we're going to actually dimension this, this time.…So I'm going to select the top line…and then this top plane…that's visible.…Let's make this 3mm.…Let's do the left edge…to this left plane…and we're going to make this,…let's try 17mm…and then reverse…the dimension or the sense of the dimension.…
And that will make it -17…and that should work just fine for us.…So OK to complete the command.…And then from this bottom line to the…brace plane,…let's make this 3mm.…And let's make the center and origin vertical.…Right, let's do an extrusion of this.…
AuthorLeon van den Heever
- Setting up the model and adding components
- Creating the main structure of the cabinet
- Modeling the door
- Building the drawer
- Testing the model
Skill Level Advanced
Modeling a Motorcycle Engine with SOLIDWORKSwith Leon van den Heever1h 49m Intermediate
SOLIDWORKS Rendering with PhotoView 360with Gabriel Corbett1h 50m Intermediate
Modeling a Bicycle Frame with SOLIDWORKSwith Leon van den Heever42m 34s Intermediate
1. Establishing Our Workflow
2. The Main Structure
3. Door and Drawer
4. Finalizing and Testing
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.