Join Leon van den Heever for an in-depth discussion in this video Drawer frame: Front and back, part of Modeling a Cabinet with SOLIDWORKS.
- In this session we'll look at creating our drawer…and there's a few components to this…so we'll do this over a number of sessions.…So let's head on over to SOLIDWORKS.…I've already hidden the components we don't need.…The planes we'll be using is Brace1 and Brace2,…also the BackingThickness and the FrontFrameWidth,…and the FrontFrameThickness…so make sure those planes are visible.…Head on over to the Skeletons and Edit component…on the Skeleton Component,…and then take the Brace1 and create a plane from it…and let's define that at 3mm.…
So this is going to be our drawer height.…And then for the drawer bottom,…we'll just drag up another plane…from this Brace2 position and at 3mm,…and we'll do the same then for the FrontFrameWidth…this time though this Distance…we will make 15mm.…So let's Enter to complete the command.…And then for the depth of our drawer,…we'll use the BackingThickness…and make that a plane of 15mm distance.…
Now let's name these, so for the first plane…we created then, let's call this…DrawerTop.…
AuthorLeon van den Heever
- Setting up the model and adding components
- Creating the main structure of the cabinet
- Modeling the door
- Building the drawer
- Testing the model
Skill Level Advanced
Modeling a Motorcycle Engine with SOLIDWORKSwith Leon van den Heever1h 49m Intermediate
SOLIDWORKS Rendering with PhotoView 360with Gabriel Corbett1h 50m Intermediate
Modeling a Bicycle Frame with SOLIDWORKSwith Leon van den Heever42m 34s Intermediate
1. Establishing Our Workflow
2. The Main Structure
3. Door and Drawer
4. Finalizing and Testing
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.