Join Gabriel Corbett for an in-depth discussion in this video Adding fillets and chamfers to a part, part of Learning SOLIDWORKS.
- Fillets and chamfers are an easy way…to make smooth corners on your part.…Go head up to Features, click on Fillet,…and click on the drop down below it.…And notice we have both Fillet and Chamfer…in that same tool bar.…So go ahead and choose Fillet.…And my first options for Fillet appear.…Fillet Type. I have a constant size fillet,…I have this variable size fillet, I have a face fillet,…and then I have a full, round fillet.…So I am going to start with just the very basic one here,…which is a constant size fillet.…And I am going to choose the item to fillet…in a second, and then down here…I am going to choose the size of the fillet.…
So I am going to type in .25,…and just go ahead and choose edges.…As soon as I choose an edge,…it just automatically fillets it.…Click on OK. And there is my fillet.…Now I don't just have to do one at a time.…I can go back to that fillet, edit it again.…And I can change all of these different edges.…I can choose faces if I want to.…And notice if I choose a face,…it chooses all of the edges attached to it.…
Author
Released
1/29/2016- Navigating the SOLIDWORKS 3D workspace
- Creating sketches
- Extruding 3D parts from 3D sketches
- Using the Spline tool
- Adding dimensions
- Trimming and extending sketches
- Using the Mirror tool to repurpose geometry
- Referencing geometry
- Adding fillets, chamfers, and patterns
- Mating parts in an assembly
- Creating part drawings
Skill Level Beginner
Duration
Views
Related Courses
-
Modeling a Bicycle Frame with SOLIDWORKS
with Leon van den Heever42m 34s Intermediate -
SOLIDWORKS: Sheet Metal Design
with Gabriel Corbett2h 55m Intermediate -
SOLIDWORKS: Surfacing
with Gabriel Corbett1h 24m Intermediate -
SOLIDWORKS: Weldments
with Gabriel Corbett1h 57m Advanced
-
Introduction
-
Welcome58s
-
-
1. Introduction to Solidworks
-
2. Basic Part Modeling
-
Creating sketches5m 25s
-
Understanding relationships4m 55s
-
-
3. Sketch Tools
-
Adding dimensions3m 24s
-
4. Modifying Sketches
-
Using the Mirror tools1m 45s
-
5. Reference Geometry
-
Building reference planes6m 14s
-
-
6. Part Modifications
-
Using the mirror command4m 13s
-
7. Hole Wizard
-
8. Building Assemblies
-
Starting an assembly3m 4s
-
-
9. Part Drawings
-
Part drawings4m 38s
-
Assembly drawings3m 43s
-
Drawings views & annotations3m 52s
-
-
Conclusion
-
Next steps40s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Adding fillets and chamfers to a part