Learn how to create open pockets.
- [Instructor] In this movie we're going to be doing…adaptive clearing on open pockets,…and let me show you how it works.…First things first, let's review our operations.…Right now you can see we've got a drilling operation…that's going to spot drill the holes.…Then we're going to do a deep drilling operation,…and then we're going to do a tap, and then we're going to…do a facing operation, so generally, I'd actually…probably prefer to do that facing operation first.…And we can easily do that by just clicking on that…operation, click on it and just drag it up here…to the top, so I'm going to do the facing operation…first, then the spot drilling, then the regular drilling,…then the tapping, and then we're going to go over here…and do some adaptive clearing.…
Now I did modify the part, and then I just regenerated…the tool path, and the adaptive clearing routine…we added in the last video automatically updated…to this tool path, you can see right here, so…we're moving this little half crescent right in here…in the adaptive tool path has automatically updated…
Author
Released
1/25/2018- Loading models and assemblies
- Stock setup
- Choosing the WCS and running multiple parts at once
- Building custom tools
- Running a drilling operation
- 2D milling operations
- Modifying your post processor
- Simulating the milling operations
Skill Level Intermediate
Duration
Views
Related Courses
-
Modeling a Motorcycle Engine with SOLIDWORKS
with Leon van den Heever1h 49m Intermediate -
Learning SOLIDWORKS (2016)
with Gabriel Corbett1h 59m Beginner
-
Introduction
-
Welcome58s
-
Using the exercise files1m 30s
-
Downloading the software3m 17s
-
-
1. HSMXpress Job Setup
-
Touring the interface4m 19s
-
Stock setup4m 58s
-
Fixture setup6m 2s
-
Work coordinate system5m 50s
-
Machine setup3m 52s
-
Post processing5m 13s
-
-
2. Tools/Tool Library
-
Selecting tools5m 2s
-
Creating custom tools4m 40s
-
Tool libraries3m 2s
-
-
3. Drilling Operations
-
4. 2D Milling Operations
-
Face6m 2s
-
2D pockets5m 33s
-
2D Contour5m 51s
-
Slot3m 57s
-
Thread milling9m 2s
-
Circular milling1m 58s
-
Bore milling4m 34s
-
Trace2m 26s
-
-
5. Simulation and Post Processing
-
Simulating the operations4m 22s
-
Cut and paste operations2m 20s
-
Time study4m 15s
-
Generate toolpath3m 11s
-
Post processor options3m 3s
-
Utilities/setup sheets2m 2s
-
-
Conclusion
-
Next steps1m 33s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Adaptive Clearing open pockets