- [Instructor] In this next prototyping lesson…we begin our discussion by first talking…about design features and strategies.…But I'm going to use the term do's and don'ts.…If you model cleanly and accurately,…you'll end up with very few,…or even zero, prototyping problems.…But, too many beginners will create…unnecessarily complicated geometry…that is fast and easy to create,…but then they spend way more time fixing…and swearing and kicking things at the end of the process.…This is where good modeling practice…can really make a huge difference.…
So I do realize we have a long list here,…which tend to be kind of boring,…so I'm going to zoom in whenever possible…at some specific examples.…So let's start off with the don'ts.…And this very first one here is sharp points or edges.…So, the penguin is actually in pretty good shape, but,…so we're going to focus on this little temporary thing here.…So you'll notice this top edge,…and I can pick the inside surface there…and have it highlight, it ends with a very razor sharp edge.…
Author
Updated
7/17/2018Released
5/9/2017- Building and detailing a space helmet
- Making a flexible duct
- Building details on round pipes
- Modeling organic objects
- Using the SrfSeam command to move seams out of your way
Skill Level Intermediate
Duration
Views
Q: Why can't I earn a Certificate of Completion for this course?
A: We publish a new tutorial or tutorials for this course on a regular basis. We are unable to offer a Certificate of Completion because it is an ever-evolving course that is not designed to be completed. Check back often for new movies.
Related Courses
-
Rhino 5 Essential Training
with Dave Schultze7h 10m Beginner -
Rhino and V-Ray: Product Design Rendering
with Dave Schultze2h 54m Intermediate -
Rapid Prototyping for Product Design
with Gabriel Corbett1h 38m Intermediate -
Rhino: Animation with Bongo
with Dave Schultze2h 26m Advanced -
Building a Gaming Console in Rhino
with Dave Schultze1h 20m Intermediate
-
Introduction
-
Welcome1m 24s
-
Exercise files32s
-
-
Tips
-
Building a space helmet12m 39s
-
Detailing a space helmet8m 48s
-
Make a car wheel10m 2s
-
It's time to make a watch10m 52s
-
Make a car tire and tread6m 30s
-
Dave's wing hack-nique7m 7s
-
Send Rhino files6m 25s
-
Export Rhino files3m 24s
-
Work with hinges7m 7s
-
Analysis: Curve continuity4m 43s
-
Create a jet engine8m 34s
-
Build air vents7m 43s
-
Dave's dimensioning strategy7m 17s
-
Symmetry tips: Mirror wisely5m 35s
-
Surface analysis tool: Zebra4m 19s
-
Analysis tool: Show Edges4m 56s
-
Fun with Fillets 2: Openings7m 16s
-
Building a 2D gear5m 44s
-
Building a 3D gear7m 1s
-
Building a pulley wheel7m 7s
-
Create a pulley belt8m 16s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Prototyping part 2: Design strategy