From the course: Rhino: Analysis and Modeling Techniques
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Create a jet engine - Rhino Tutorial
From the course: Rhino: Analysis and Modeling Techniques
Create a jet engine
- [Instructor] Next up, I demonstrate some simple steps for building a jet engine for your favorite penguin spaceship. You'll see as we build a very complex engine from a surprisingly small set of commands and curves. Let's start off by zooming in here to the back where a bunch of curves are already made. You might notice there is a line right here down the center that's pretty important. That'll be our axis for some of the operations coming up. But first, let's work on this housing. This is a single line. We want to have a double line for the thickness of the housing, so I'll go use the standard curve offset. We can go to the curve menu here, offset, offset curve. Now typically, it'll default to a number of one or whatever the last value used. Right here, it says 10, and we can go both sides. We're going to try something a little bit different. Right here, I'm going to select through point up on the command line,…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
Make openings in your geometry6m 53s
-
(Locked)
Work with hinges7m 7s
-
(Locked)
Using named positions5m 39s
-
(Locked)
Analysis: Curve problems and fixes5m 36s
-
(Locked)
Analysis: Curve continuity4m 43s
-
(Locked)
Analysis: Curvature Graph tool5m 1s
-
(Locked)
Create a jet engine8m 34s
-
(Locked)
Build air vents7m 43s
-
(Locked)
Tips for faking edge thickness5m 15s
-
(Locked)
Dave's dimensioning strategy7m 17s
-
(Locked)
Symmetry tips: Mirror wisely5m 35s
-
Surface analysis tool: Direction5m 46s
-
(Locked)
Surface analysis tool: Environment Map4m 48s
-
(Locked)
Surface analysis tool: Zebra4m 19s
-
(Locked)
Surface analysis tool: Draft Angle Analysis4m 17s
-
(Locked)
Analysis tool: Show Edges4m 56s
-
(Locked)
Fun with fillets 1: Edges and walls5m 30s
-
(Locked)
Fun with fillets 2: Openings7m 16s
-
(Locked)
Fun with fillets 3: Advanced options5m 51s
-
(Locked)
Untrim: Your new favorite command5m 5s
-