Assembling the frets

- [Male Narrator] We've gone through the process of…modeling each one of the parts of our musical instrument.…So we've got the three dimensional parts as well as the…two dimensional profiles that we'll use for the…measured drawing, which we'll hand off to…the fabricator later.…Now it's time to start assembling the three dimensional…parts together, and that will lead us into…being able to make 3D renderings, as well as a…3D print of the fully assembled instrument.…So, in this video, we'll start out by arranging…the frets in the little tracks of the base piece…of the instrument.…And I just need to do a…little bit of layer management, here.…

I've already got the Solid base layer turned on,…as well as the Solid top layer.…I'd also like to turn on the Metal Parts layer,…and I need to expand that down and turn on…the Solid Metal Parts.…We'll leave the Hardware off for now,…and we'll get to that in a later video.…What I'd like to look at here are the frets,…and those are these two shapes right here.…So, kind of little metal cylinders,…