From the course: Revit 2017 Essential Training: MEP (Imperial)
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Solution: Electrical - Revit Tutorial
From the course: Revit 2017 Essential Training: MEP (Imperial)
Solution: Electrical
(soft music) - [Voiceover] So, here's what I did. I'm sure finding the kitchen wasn't a big problem. It's right here in the middle of the building. So what I'm going to do is I'm going to place a couple of receptacles, right here and right here. So I go to my Systems tab, I click the drop-down here and I go to Electrical Fixture. I'm going to click the drop-down here, I'm going to grab a GFCI since it's above a counter. Notice that when I grab a GFCI my elevation raises to four feet. I kind of cheated a little bit. But the trick is to get it to flip into the right direction. I'm going to put one in there, I'm going to select it, and I'm just going to copy it down. And I'm going to hit Escape a couple times. Now I'm going to cut a section. On my quick-access toolbar I'm going to select Section. I'm going to start here and I'm going to end here. I want to make sure I can see my entire counter by moving my extends past the back wall. I'm going to hit Escape a couple times and I'm going…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Adding receptacles1m 56s
-
(Locked)
Adding panels1m 57s
-
(Locked)
Creating spaces3m 43s
-
(Locked)
Creating a circuit1m 41s
-
(Locked)
Adding lighting fixtures2m 45s
-
(Locked)
Adding switches1m 35s
-
(Locked)
Creating a lighting circuit1m 30s
-
(Locked)
Creating a switching circuit1m 17s
-
(Locked)
Creating and labeling a wiring plan3m 19s
-
(Locked)
Adding conduit3m 25s
-
(Locked)
Creating conduit types4m 19s
-
(Locked)
Adding cable tray3m 11s
-
(Locked)
Challenge: Electrical29s
-
(Locked)
Solution: Electrical1m 40s
-
-
-
-
-
-
-