Join Paul F. Aubin for an in-depth discussion in this video Setting up a stair type, part of Revit Architecture: Advanced Modeling.
Throughout this course we've considered many ways to explore a building…design using both massing forms and basic model components like walls, floors, and roofs.…Our museum building has certainly come a long way from the beginning of the course.…In this chapter, we'll look at a few miscellaneous items to round out the design.…In this movie, we're going to start a three- part series on the grand stair in the main lobby.…There are no stair-modeling tools in the conceptual massing environment,…so we're going to take a look at what our end goal is here.…And this is what we will have at the completion of the three movies. And it is…one large grand stair here with a triangular taper on both ends that goes up to…the second floor, and then at the landing, it tapers off into this second flight…of stairs running off in this direction here.…
In the first movie here, we're going to actually just build the stair type.…If you look at this stair, it's got open risers, it's got stringers that are…inset from the edges, a stringer down the middle. The risers are actually…
Author
Released
3/28/2012- Understanding some different approaches to modeling
- Building an in-place mass
- Creating and manipulating massing forms
- Using X-Ray and Dissolve
- Performing an energy analysis
- Applying geometry to surfaces
- Configuring divided surfaces
- Nesting massing families
- Stitching borders with adaptive components
- Working with lofting techniques
- Adding dormers and soffits
- Choosing a wall modeling strategy
- Working with curtain walls
- Building custom stairs
- Creating a custom material
Skill Level Intermediate
Duration
Views
Related Courses
-
SketchUp 8 Essential Training
with George Maestri6h 26m Beginner -
Revit Architecture: The Family Editor
with Paul F. Aubin6h 40m Intermediate
-
Introduction
-
Welcome1m 2s
-
Designing the assets3m 1s
-
-
1. Getting Started with the Massing Environment
-
Building an in-place mass7m 26s
-
Manipulating forms8m 50s
-
Using X-Ray and Dissolve7m 13s
-
Designing parametric masses10m 21s
-
2. Using Massing to Design Building Forms
-
Importing a site image11m 17s
-
Adding basic forms10m 33s
-
Building the annex7m 54s
-
Cutting mass floors7m 44s
-
Modifying building forms11m 10s
-
Laying out a floor plan9m 2s
-
Applying geometry to surfaces12m 41s
-
-
3. Rationalizing Massing Forms
-
Configuring divided surfaces10m 33s
-
Adding patterns6m 21s
-
Nesting families8m 27s
-
Creating complex panels8m 30s
-
Finishing complex panels6m 57s
-
Stitching borders7m 56s
-
-
4. Using Massing to Create Unique Forms
-
Nesting adaptive families6m 43s
-
Understanding lofting techniques10m 19s
-
5. Refining Building Maker Elements
-
Editing floors4m 38s
-
Refining face-based walls6m 54s
-
Adding dormers7m 45s
-
Creating soffits3m 40s
-
-
6. Choosing Wall Modeling Strategies
-
Adding sweeps and reveals6m 26s
-
Sculpting a wall9m 11s
-
Building shafts7m 48s
-
7. Working with Curtain Walls
-
Using Design Options6m 19s
-
Building sloped glazing9m 32s
-
8. Applying Finishing Touches
-
Setting up a stair type4m 52s
-
Building a custom stair7m 28s
-
Finishing a custom stair5m 22s
-
Editing railings6m 10s
-
Importing a CAD file4m 22s
-
Applying decals6m 10s
-
Creating a custom material9m 34s
-
-
Conclusion
-
What's next44s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Setting up a stair type