Join Eric Wing for an in-depth discussion in this video Optimization, part of Revit 2018: Essential Training for MEP (Metric).
- [Instructor] There are a few different ways…to get fabrication parts into our model.…One way, the way I do it, is simply model…as you normally would, then physically convert…what you've modeled into parts.…My objective here is to model some duct and pipe…the old fashioned way.…Then we're going to optimize this into construction parts.…Let's jump in to Revit.…And under projects, I want to start a new model…using the Mechanical Template, so go ahead and click that.…Let's go to the Systems tab.…
And I want to load in some fabrication parts.…So, I'm going to click on the little…Fabrication Settings arrow.…And under Fabrication Configurations,…if we click this drop down here,…we'll see we have some configurations.…Let's go down to Revit MEP Metric Content.…I'm not sure what I want here,…so I'm going to select it all.…Now these are unloaded services,…we need to load them into our model.…Click Add, and then click OK.…
And it takes a second to load them.…Now, on the fabrication panel, if we click Fabrication Part…we'll see we've got all of our services.…
You can dive into a specific trade, or take the entire course to learn about all aspects of the vast Revit MEP ecosystem. Upon completion, you'll know how to create basic floor plans, design electric circuits and lighting systems, model air intake and exhaust systems, create plumbing plans, and design fire alarm and sprinkler systems, and document your designs for construction and fabrication.
- Electrical features
- Mechanical features
- Plumbing features
- Fire protection features
- Adopting Revit into your workflow
- Creating detailed views
- Creating sheets
- Controlling revisions
- MEP fabrication parts
Skill Level Beginner
Revit: Tips, Tricks, and Troubleshootingwith Paul F. Aubin24h 13m Appropriate for all
1. Starting a Revit Project
2. Revit Electrical
3. Revit Mechanical
4. Revit Plumbing
5. Revit Fire Protection
6. Revit Worlkflow
7. MEP Fabrication Parts
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.