From the course: Revit: Multifamily Housing
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Further thoughts - Revit Tutorial
From the course: Revit: Multifamily Housing
Further thoughts
So, we still need to be able to model that in. Also, we have not found the exact location for where this footing and this column needs to be located. That may be the exact spot where it should be but it could be up a few inches from here or down a couple of feet from here. We will make those adjustments as we go along, as we're developing the design. I just happened to know that, where things are at right now, it will structurally support the building up above. or whatever the case may be. So we could always do that as well. So depending on how you want to put together model literally everything inside of this environment or you can just start to note out where those things would be and then let them figure it out in the field as far as the actual construction process is concerned. Now, none of these ways of going about using Revit is necessarily wrong. It really comes down to how much it is you need to model, how you want to communicate your design intent, and just generally…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
Column locations8m 13s
-
(Locked)
Column placement4m 43s
-
(Locked)
Loading beam2m 16s
-
(Locked)
Beam placement7m 54s
-
(Locked)
Beam adjustments7m 45s
-
(Locked)
Beam and column adjustments7m 51s
-
(Locked)
Column adjustments8m 10s
-
(Locked)
Creating isolated footings8m 22s
-
(Locked)
Further thoughts7m 5s
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-