From the course: Revit: Structural Families
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Creating structural stiffeners using a template
From the course: Revit: Structural Families
Creating structural stiffeners using a template
- [Instructor] Sometimes we need to just insert a small stiffener in a beam when a column bears on it, or when you want to alleviate twist in a structural member. By using the structural stiffener template, we're going to create a line based structural stiffener and add it to the model. So to get started under families, let's go new, browse to your region. Let's scroll down to structural stiffener line based, click open. So we're going to create an extrusion right here. First thing I want to do is create a couple of reference planes, so right click and this reference plane and go to create similar, on the draw panel, click on your pick lines button for the offset will go one half inch. Lets go up, lets go down, hit escape couple of times on the measure panel, let's click align dimension and go there and then go there and then go there, pick a point off of it. Now click the EQ button. Now let's put an overall…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Creating lintel openings and headers9m 10s
-
(Locked)
Creating lintel if parameters6m 25s
-
(Locked)
Tagging lintels in the model6m 2s
-
(Locked)
Creating joist bridging annotations6m 43s
-
(Locked)
Creating joist bridging 3D elements9m 8s
-
(Locked)
Creating in-place structural stiffeners6m 24s
-
(Locked)
Creating structural stiffeners using a template6m 38s
-
(Locked)
Creating cross bracing7m 40s
-
(Locked)
Creating a bolt10m 34s
-
(Locked)
Type lookup files3m 39s
-
-
-
-
-