Join Paul F. Aubin for an in-depth discussion in this video Creating a new project from a template, part of Revit Architecture 2016 Essential Training (Imperial).
- All the work you do in Revit is contained in a single Revit project file. There's a few different ways that we can create new projects in Revit. We can use the Recent Files screen, or the Application menu. Both of these which we've looked at in a previous movie. So I wanna focus just on the New File creation areas. Here we've got New, or the Architectural and Construction Template. Or under the big R, the Application menu, we can go to New and then Project. Now there's not a whole lotta difference between which way you choose it. If I choose New Project here, it brings up a dialogue.
New Project. And it lists out for me those same two templates that we saw listed here. And if I click this New link, I get the same dialogue. So it's really the same command either way. The difference would be if you're already in a project, then you wouldn't see the Recent Files screen, so you'd wanna use the Application menu. Now the differences between the Architectural Template and the Construction Template are something that I wanna look at here in this movie. If I choose the Architectural Template and I click OK, and I could've gotten there with that shortcut.
I get a really basic starting point. If we look at the Project Browser, we get a Level 1 and Level 2 Floor Plan. We've got a couple Ceiling Plans. And a few Elevations. There are no Sheets. There are no Schedules. It's a really, really basic project. It's sort of like a no frills, just get me into the program sort of project. But there are lots and lots of settings, or lots of things that can be pre-configured in a Project Template. And I'm gonna just show you a couple examples by closing this.
Not gonna save it. And opening up some of the other templates to take a look. And I'll start with this Construction Template right here. Just as a point of contrast. When I open that, the screen here looks pretty much the same. But if you look at the Project Browser, you can see that there are some differences. Instead of just having Level 1 and Level 2 Floor Plan, I now have some additional Floor Plans showing in the list. Under 3D Views, I have several additional Views showing in the list. And if I scroll even further down, I have some Schedules.
Quite a few actually. And I have some Sheets already. Now let me show you how some of this works. All of those Views don't really tell us very much unless there's something to view. I'm just gonna come over here, and add a Wall. And don't worry about the specifics right now. We'll be talking about Walls and Doors in a future movie, but I'm gonna add a Wall and a couple quick Doors. And zoom in here. And this one is Door number 1.
You can see right there. This one is Door number 2. You can see it right there. And this one is Door number 3. You can see it right there. Now, if I scroll down, and look at one of these other Views, like a South Elevation. You can already see the Wall and the three Doors. Or, perhaps this Doors Quantities Schedule. What you see here is that there is a single line item listed here, but it says the Count is 3. So it's recognizing that I actually have three different Doors on that list.
Now if I go back to Level 1 and I select one of these Doors and change it to something else. Gets a little smaller. Scroll down. Open up that same one. You'll see I now get two different line items. So this was the Construction Template. And if you look at the names of these Schedules, they all start with either QA or QC, for quantities or quality control. So the kinds of things that a contractor might be interested in is counting stuff or verifying that everything is the way it should be.
But they're certainly interested in the quantities that would be in the model so that they could order the correct materials and make sure everything gets to the site. You can see that all these Schedules are pre-configured to list out that kind of information, so that they just simply start drawing and these lists are already populating themselves automatically. So this is one of the really powerful benefits of starting with a template. I'm gonna close this one. And I'm not gonna save it. And there are a few other templates that are provided, and I wanna just show you what a couple of those look like.
And to do that, I'm gonna click the New link here, and go to Browse this time. Construction and default are listed here. Default is actually what they're calling the Architectural Template. That was that really simple one that had very little in it. And Construction is the one that we just looked at. But there's also a Commercial and a Residential-Default listed here as well. Now we're gonna begin a project here in the coming movies, and we're gonna start it with the Commercial-Default. And let me just show you what that template looks like. I'm gonna choose it right there.
Click OK. And take a look. We've got some different Floor Plans. Elevations. Simpler Schedules this time, you know just a basic Door Schedule, basic Room Schedule. But this one's got a whole bunch of Sheets already in here. So here's what I'm gonna do. I'm gonna add a Wall. Again, don't worry too much about the specifics. I'm gonna add a Door to that Wall. Again, don't worry too much about those specifics. Now, if I scroll down here, we would see that Wall that I've just drawn, from either from the South, or one of the other Elevations like the West or the East.
Here's what it looks like from the South. Here's what it looks like from the West. Okay, we're just sorta seeing it edge on. I drew it at a slight angle. If I scroll down here, you'll see that there's a couple Sheets that are listed here that already are set up for Elevations. A4 has the North and South Elevation. A5 has the East and West Elevation. I'm gonna open up A4 by double-clicking on it right here. And what you see is, this right here is the North Elevation. That's number 2.
This one's the South Elevation. That's number 1. Here's the model. Here's the model. Now if I return to my Floor Plan, Level 1 Floor Plan, and you zoom in here. This is the West Elevation. That's number 2 on A5. The ones we just looked at are this one. Number 1 on A4. And this one, Number 2 on A4. Revit automatically inputs the drawing number and the drawing reference directly in the symbols for us.
And when you start in one of these templates that's already pre-configured this way, you can basically just start drawing your model in the correct location. And you're already getting Schedules that are populating themselves, like the one we saw a moment ago in the Construction Template. Or Sheets that are showing appropriate Views already. There's a lot of things that can be pre-built and put into the template to get you started. Now there's a lot of stuff that you can't put in the template automatically as well. So in the next few movies, we're gonna be looking at some of the early project setup things that we would wanna do, like setting up levels, and setting up grids and so forth.
Your template can only take you so far. But it's a great place to get started. And you are highly recommended to always start your Revit projects with an appropriate template. Now many of you may actually be in a firm that has their own custom template. So rather than choosing from one of the ones I've just shown you here, which are really just examples, you might be using one that comes from your office standards that somebody there in your firm has created. Regardless of the template you start with though, all projects should really be begun with an appropriate template.
Paul also shows advanced techniques for modeling stairs, complex walls, and partially obscured building elements, as well as adding rooms and solid geometry. Finally, discover how to annotate your drawing so all the components are perfectly understood, and learn how to output sheets to DWF, PDF, or AutoCAD.
- Understanding BIM and the Revit element hierarchy
- Navigating views
- Creating a new project from a template
- Adding walls, doors, and windows
- Adding plumbing fixtures and other components
- Linking AutoCAD DWG files
- Rotating and aligning Revit links
- Working with footprint and extrusion roofs
- Adding openings
- Adding railings and extensions to stairs
- Creating stacked and curtain walls
- Hiding and isolating objects
- Adding rooms
- Creating schedule views and tags
- Adding text and dimensions
- Creating new families
- Using reference planes, parameters, and constraints
- Plotting and creating a PDF