- [Instructor] Once you have a camera view placed…there's a variety of ways…that you can make adjustments to that camera.…If you're inside of the view,…move your cursor to the outside of the view…and then select on the box on the outside of the view.…After doing that, you'll see in your properties…that you have all the properties…associated with your current view.…One of the options is the far clip offset.…That's how far back that you're looking inside of the view.…
Right now, we can see that this is set.…It's in millimeters and we can see it's at 22,040.…Well, if we set this to be 100 and then click on Apply,…notice how everything goes away.…And that's because this entire view got brought up…very, very close by.…And that there's nothing only 100 millimeters away…from where we're currently standing.…If we change this to be…2,000 and click on Apply,…notice how we're starting to see more detail.…
That's because we're starting to see more objects…that are within that view range.…Or in this case, the far clip offset.…
Author
Released
11/28/2017- Using view templates
- Organizing the project browser
- Creating a room finish schedule
- Assigning finishes to rooms
- Creating new materials
- Placing interior walls
- Creating custom wall types
- Loading families into Revit
- Placing furniture, cabinets, countertops, and sinks
- Creating a casework family
- Finalizing design options
Skill Level Intermediate
Duration
Views
Related Courses
-
Revit for Interior Design: Interior Walls
with Ed Cotey3h 34m Intermediate -
Revit for Visualization
with William Carney2h 59m Intermediate
-
Introduction
-
Welcome55s
-
-
1. Views
-
Creating floor plan views4m 48s
-
Using view templates6m 40s
-
Creating camera views6m 1s
-
-
2. Materials and Finishes
-
Assigning finishes to rooms6m 34s
-
Creating new materials3m 45s
-
Material display in drawings7m 15s
-
Tagging materials (BIM)6m 2s
-
Materials at floors7m 49s
-
-
3. Walls
-
Placing interior walls5m 44s
-
Wall properties3m 55s
-
Creating custom wall types8m 35s
-
Sweeps within wall types7m 33s
-
Reveals within wall types5m 18s
-
Fix sweep conditions6m 22s
-
Adding openings5m 51s
-
Modify wall profiles7m 31s
-
Painting materials on walls4m 41s
-
Modeling materials at walls9m 33s
-
Applying your skills7m 53s
-
-
4. Placing Families
-
Loading families into Revit2m 58s
-
Placing furniture2m 54s
-
Placing cabinets4m 42s
-
Placing countertops3m 26s
-
Placing the sink2m 51s
-
Adding a kitchen island3m 48s
-
-
5. Lighting Families
-
Placing lights in ceilings7m 13s
-
Light fixture overview5m 18s
-
-
6. Family Creation Overview
-
Mass objects9m 49s
-
Void objects6m 53s
-
Create a vase5m 34s
-
Creating reference planes4m 31s
-
Adjust mass objects2m 31s
-
Making furniture parametric7m 56s
-
7. Create a Table
-
Create a furniture family1m 58s
-
Creating a table top10m 6s
-
Creating table legs4m 58s
-
Add reference planes2m 14s
-
Model the table legs7m 53s
-
Create a table type5m 49s
-
-
8. Create a Sofa
-
Modeling the sofa arms4m 59s
-
Modeling the cushions3m 35s
-
Modeling the sofa back2m 39s
-
Creating detail with voids5m 56s
-
Adding materials4m 2s
-
Finalizing the design2m 23s
-
-
9. Creating Custom Casework
-
Creating a casework family1m 45s
-
Create a base2m 10s
-
Model doors5m 14s
-
Adding voids6m 31s
-
Assigning materials3m 49s
-
Casework in plan view4m 19s
-
Creating cabinet types4m 9s
-
-
10. Design Options
-
Viewing the design options7m 17s
-
11. Renderings
-
Place a camera3m 20s
-
Rendering interface6m 39s
-
-
Conclusion
-
Next steps37s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Creating camera views