From the course: Revit: Multifamily Housing
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Create a simple road - Revit Tutorial
From the course: Revit: Multifamily Housing
Create a simple road
- [Instructor] Now, much like we did the sidewalk, we'll come up here to Massing and Site, I'll come across in this direction. They'll just be one. I'm not exactly sure where it is that I need to go to, Come up to here, and then stop. Go to the end point of this line. Come up here and stop. Next, I'm going to window around these, So I'll select on a spot, As much as possible, and it doesn't accidentally angle. I will say this that it appears that either my building or the site itself, or maybe and more likely the street may be at a slight angle. So it may not be 100% straight and I may need to make some modifications I'll come across again. and then come back in and redo it. So if everything doesn't line up just perfectly, it is possible to make adjustments. Then I'm going to select on this line, and then select on the Split Element tool. Click each one of these. Then, use Trim/Extend the Corner. Select this line. Select this line. Select this line. Select this inside line. Click…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(Locked)
Site creation: First steps3m 19s
-
(Locked)
Adding topography14m 16s
-
(Locked)
Excavate from the building5m 31s
-
(Locked)
Changing site materials2m 24s
-
(Locked)
Adjusting basement walls 15m
-
(Locked)
Adjusting basement walls 27m 26s
-
(Locked)
Create a simple sidewalk7m 14s
-
(Locked)
Create a simple road6m 56s
-
(Locked)
Adding plants5m 57s
-
(Locked)
-
-
-
-
-
-
-
-
-