From the course: Revit: Multifamily Housing

Unlock the full course today

Join today to access over 22,600 courses taught by industry experts or purchase this course individually.

Create the section view

Create the section view - Revit Tutorial

From the course: Revit: Multifamily Housing

Start my 1-month free trial

Create the section view

“

for the use of detailing out a wall section. we're going to need to go to the View tab on the Ribbon, then select on Section. What I'd like to do is just create a small section from here to here. That's between building A and building B. is that anything between the line and the dash line, but the dash line goes through some stairs, which means with the section highlighted, click where you have that blue line, then pull that dash line back so that you have just a very little gap between here and here. That means that if you would right-click If it's 3/32 of an inch text, then it's always 3/32 of an inch. But it's always the appropriate scale in relationship to the scale of the overall building view that you've created, or in this case, a section view. Also, if we look at this really close, we'll see that certain pieces of text we'll see that certain pieces of text are currently overlapping each other. Now that's not very good if we need to see that text…

Contents