From the course: Cert Prep: Revit Structure Certified Professional
Unlock the full course today
Join today to access over 22,400 courses taught by industry experts or purchase this course individually.
Create and modify shaft openings - Revit Tutorial
From the course: Cert Prep: Revit Structure Certified Professional
Create and modify shaft openings
- It looks like we need to cut a hold around our stairs. One way of doing this is to go to each floor and cut a hole in each level. Another better way of doing it is to create a void that follows the profile of the stairs. This method is better because any floor or roof or ceiling that crosses through will be automatically cut out. Let's jump into REVIT. Let's open a project, browse to where you're keeping your exercise files. Let's find the file called Shafts. Click Open. As you can clearly see, we have a problem. Let's go down to level one structural plan. Let's zoom in on our stairs. I'm going to select a section and kind of move it out of the way. I'm going to put a gap in it slide it down hit Escape a few times. Under Opening let's go Shaft. On the Drop panel let's go ahead and click the Rectangle button. The first point of my rectangle I'm going to pick is going to be right here. The second point I'm going to pick is going to be right here. Hit Escape a few times. Now let's go…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Place and modify structural columns4m 38s
-
Place and modify walls4m 23s
-
Create custom wall types4m 1s
-
Create concrete slabs and/or floors2m 56s
-
Place footings3m 22s
-
Create and modify stepped walls in foundations2m 35s
-
Place rebar8m 45s
-
Place free form rebar5m 27s
-
Add beams8m 42s
-
Add beam systems7m 6s
-
Add joists5m 2s
-
Add cross bracing to joists6m 34s
-
Work with roofs7m 13s
-
Model floors9m 24s
-
Create and modify stairs6m 45s
-
Create and modify shaft openings5m 6s
-
Create and modify ramps4m 32s
-
Create and use trusses6m 49s
-
-
-
-