Learn how to make a .rfa signage family to place with Dynamo.
- [Instructor] To make the signage family,…I'll start by adding the parameters I need…through the family types menu.…I'm going to add a type base height parameter…as well as a type base width parameter…and a type base thickness parameter.…These will be the dimensions of my song.…I'm gonna add another type base parameter…but it's going to control the location of the sign.…
I'll call this offset from door.…I'm gonna add another parameter, this one's gonna be…a length parameter but an instance based parameter…and I'm gonna name it wall width.…I'll use dynamo to set this parameter…to match the door that's the location of the sign…with its hotes wall thickness.…I'll add another instance based length parameter.…
We're gonna name this door width.…We'll use dynamo to set this parameter based on…the door width that the sign's located at.…I'm gonna reorganize my dimensions to group together…the dimensions in a way that I work with them.…I'll move the door width parameter down to the bottom…of our list keeping the dimensions of the sign together…
- Working with room boundaries
- Creating wall protection, door signage, and corner guard Revit families
- Placing wall protection, door signage, and corner guard Revit families
- Resolving conflicts with family placement
- Accommodating inside and outside room boundaries
Skill Level Advanced
1. Working with Rooms
2. Line-Based Wall Protection
3. Door Signage
4. Corner Guards
Combine all three1m 15s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.