Learn how to make a .rfa signage family to place with Dynamo.
- [Instructor] Now let's add some geometry to this family.…From the create tab, I'm going to create an extrusion.…I'm going to click to set the work plane,…and because I name my reference planes,…I can pick mounting height from the list of names.…This'll ensure that the geometry will move…with the associated reference planes.…I can use the pick line tool, make sure to check lock,…and pick the reference planes that I've already drawn.…Then if I trim the rectangle together,…I can create an extrusion on my sign.…
If I click the green checkbox to finish,…I can go to elevation and align the bottom reference plane…with the top of my geometry and lock it.…Now when I change the height,…the extrusion will move with it.…I'm going to select the extrusion,…and I'll set the material parameter to be SignMaterial1.…Now I'm going to add some model text to this sign.…On the create tab, I can set my work plane,…and under name, I'm going to pick front of sign.…
If I click okay, now I can click on the create tab…and click model text.…
- Working with room boundaries
- Creating wall protection, door signage, and corner guard Revit families
- Placing wall protection, door signage, and corner guard Revit families
- Resolving conflicts with family placement
- Accommodating inside and outside room boundaries
Skill Level Advanced
1. Working with Rooms
2. Line-Based Wall Protection
3. Door Signage
4. Corner Guards
Combine all three1m 15s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.