Join Eric Wing for an in-depth discussion in this video Cleaning truss connections, part of Building Roofs with Revit.
…Revit does an awesome job placing trusses, then allowing you to…form them to suit your immediate situation for the top cord and for the bottom cord.…It completely ignores how we cut the framing to actually fit together however.…What we'll be doing in this video is, first we're going to open up a section.…Then we're going to go in and we're going to cope our framing members.…Then we're going to unpin them and stretch them and cope them again.…Then we're going to take a look at the coping settings within the framing…member itself.…So in our Revit Roofs file, let's go ahead and go down to O-3 Roof.…
I'm going to open up this section that I have looking at my truss.…What I need to do is start coping up here.…I'm going to go to my Modified tab,…I'm going to click on my Cope button, uncheck Multiple Cut.…Now, Revit's asking us to select the element to be coped first.…Okay, I'm going to go ahead and select this member.…Then I'm going to select this member here and it gets coped out.…I'm going to do the same for this side,…
Author
Released
9/4/2014- Adding flat-roof materials
- Building a gable
- Creating dormers and skylights
- Adding fascias and soffits
- Creating roofs by extrusion
- Building in roof structure
- Adding detailing
Skill Level Intermediate
Duration
Views
Related Courses
-
Revit MEP 2014 Essential Training
with Eric Wing3h 31m Beginner -
Creating Concrete Buildings with Revit Structure
with Eric Wing1h 56m Intermediate
-
Introduction
-
Welcome44s
-
-
1. Flat and Shed Roofs
-
Adding a flat-roof material5m 59s
-
Adding sloped framing3m 11s
-
Adding crickets5m 26s
-
Sloping flat roofs2m 58s
-
-
2. Pitched Roofs
-
Building a hip roof3m 27s
-
Adding a gable4m 13s
-
Adding a sloping gable3m 25s
-
Creating a Dutch gable roof8m 10s
-
Creating a Dutch hip roof7m 28s
-
Adding a mansard roof4m 48s
-
Creating a gambrel roof7m 12s
-
-
3. Dormers and Skylights
-
Adding roof-edge dormers2m 48s
-
Adding dormer walls3m 7s
-
Adding dormer openings2m 14s
-
Adding skylights and curbing2m 45s
-
-
4. Fascias and Soffits
-
Adding a flat fascia2m 52s
-
Adding the default soffit3m 11s
-
-
5. Roofs by Extrusion
-
Adding a roof by extrusion4m 49s
-
Trimming an extruded roof3m 23s
-
Adding a roof by face6m 23s
-
-
6. Roof Structure
-
Attaching columns to roofs4m 23s
-
Adding 2 x 10 sill plates4m 27s
-
Adding Howe trusses5m 35s
-
Cleaning truss connections3m 53s
-
-
7. Roof Detailing
-
Detailing rake ends8m 56s
-
Truss detailing8m 13s
-
Valley details6m 40s
-
Wall attachment details2m 46s
-
Materials3m 45s
-
-
Conclusion
-
Next steps16s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Cleaning truss connections