Join Eric Wing for an in-depth discussion in this video Adding sanitary sloped piping, part of Revit 2018: Essential Training for MEP (Metric).
- [Voiceover] Let's do the hardest thing in all of Revit,…Slope Piping.…Luckily, new to 2017, there's been some nice changes.…So, let's tackle this thing once and for all.…Let's just start doing some Sloping Piping here, and then…we'll do the tricky part of connecting Sloping Piping…from here into an unknown elevation here.…I'm gonna select this toilet.…Now, I'm gonna go ahead and click on this Create…Pipe button.…Nothing too tricky yet.…
However, we now have some tools that we can use.…So, I want to click on the Slope Down.…I want to click on this drop-down here, and I want to…slope it down 1%.…Now what I want to do is I want to click on Show…Slope Tooltip.…It's kinda helpful.…Now, we see that.…It gets in the way a little bit, but I'm okay with it.…I'm gonna come up to about here, pick a point.…
It used to be this would blow up already, so we're…doing well.…I'm going to keep going in this direction.…I'm gonna come out to about here.…Now, I'm gonna give it an Offset.…I'm gonna go minus 200.…Hit Enter.…I'm gonna keep going in this direction.…
You can dive into a specific trade, or take the entire course to learn about all aspects of the vast Revit MEP ecosystem. Upon completion, you'll know how to create basic floor plans, design electric circuits and lighting systems, model air intake and exhaust systems, create plumbing plans, and design fire alarm and sprinkler systems, and document your designs for construction and fabrication.
- Electrical features
- Mechanical features
- Plumbing features
- Fire protection features
- Adopting Revit into your workflow
- Creating detailed views
- Creating sheets
- Controlling revisions
- MEP fabrication parts
Skill Level Beginner
Revit: Tips, Tricks, and Troubleshootingwith Paul F. Aubin14h 24m Appropriate for all
1. Starting a Revit Project
2. Revit Electrical
3. Revit Mechanical
4. Revit Plumbing
5. Revit Fire Protection
6. Revit Worlkflow
7. MEP Fabrication Parts
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.