From the course: Revit: Design a Multi-Trade Commercial Building
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding roof joist systems
From the course: Revit: Design a Multi-Trade Commercial Building
Adding roof joist systems
- [Instructor] Open-web roof joists need to be dealt with differently than wide flange beams. We need to actually figure out which framing members are going to support our joists, then set that framing down two and a half inches. We've got a lot to do so let's just jump in. Under Models, let's go Open. Let's go to 310, click Open. Okay, let's go to our roof plan in our project browser. Let's select any one of these framing systems. Go ahead and slip this one. Let's right click, select all instances visible in view. Now, just simply hit your Delete key, they're gone. Now, what I want to do is set all of these framing members down two and a half inches. So, hit your Control key and select all your horizontal beams. And grab your radial tubes. Now, in our properties, let's scroll down till we find Z offset value, type in minus 2.5 inches, hit Enter, perfect. Now, let's go to the insert tab. Let's load family. Now…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Finding the internal origin1m 50s
-
(Locked)
Linking architecture internal origin to internal origin3m 12s
-
(Locked)
Setting up levels4m 2s
-
(Locked)
Laying out the grid5m 43s
-
(Locked)
Adding foundation walls3m 25s
-
(Locked)
Adding piers and pilasters3m 6s
-
(Locked)
Adding steel columns2m 58s
-
(Locked)
Adding perimeter framing3m 58s
-
(Locked)
Adding beam systems4m 35s
-
(Locked)
Adding roof joist systems5m 6s
-
-
-