From the course: Revit 2017 Essential Training: MEP (Imperial)
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding conduit - Revit Tutorial
From the course: Revit 2017 Essential Training: MEP (Imperial)
Adding conduit
- Showing conduit in previous versions of Revit has been, well, difficult. Up until Revit 2010, conduit didn't even exist at all. Now that we're up to Revit 2014, drawing conduit has vastly been improved upon. Let's focus on how to get conduit started. The first thing I'd like to do is cut a section, and we're going to establish a point on a panel in which to start our conduit. Then we'll draw some four inch conduit up and out of the room that the panel is in. First thing I'd like to do is in the project browser, let's make sure we're in power, floorplans, level one. And let's zoom in on an electrical room. I'm going to pan around, just to get set. On my quick access toolbar, I'm going to click the section button. With my section, it's a two point pick. I want to pick the first point here, and the second point here. So go ahead and pick your first point of your section. You can scroll out a little bit. And then pick the second point. We can control how far into the building our…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Adding receptacles1m 56s
-
(Locked)
Adding panels1m 57s
-
(Locked)
Creating spaces3m 43s
-
(Locked)
Creating a circuit1m 41s
-
(Locked)
Adding lighting fixtures2m 45s
-
(Locked)
Adding switches1m 35s
-
(Locked)
Creating a lighting circuit1m 30s
-
(Locked)
Creating a switching circuit1m 17s
-
(Locked)
Creating and labeling a wiring plan3m 19s
-
(Locked)
Adding conduit3m 25s
-
(Locked)
Creating conduit types4m 19s
-
(Locked)
Adding cable tray3m 11s
-
(Locked)
Challenge: Electrical29s
-
(Locked)
Solution: Electrical1m 40s
-
-
-
-
-
-
-