Join Eric Wing for an in-depth discussion in this video Placing rebar perpendicular to the cover, part of Creating Concrete Buildings with Revit Structure.
…Adding your reinforcing bar perpendicular to face means you…will see the section of the bar, basically the dot.…This dot can be seen at whatever spacing you wish and will…still adhere to the cover setting set forth in the hosting concrete element.…The purpose of this video is to select a foundation wall…in section, click the Rebar button, then select Rebar Perpendicular to Face.…We're going to use the bar shape double ought or double zero.…So, to get started, in the Project Browser, under…Structural Plans, let's go down to top of footing.…
Let's go to our section.…Let's zoom in to our foundation section.…Go ahead and select your foundation wall, making sure that you're…inside of the foundation wall, so you don't select the pier beyond.…I'm going to select this wall.…I'm going to click on Rebar.…This time, I'm going to go Perpendicular To Cover.…I'm going to keep the same shape, but my…layout is going to want to go to maximum spacing.…For the spacing, let's go 12"…Now, when I bring my bar inside of here, I want to…
- Creating levels
- Creating a structural grid
- Adding single and multiple columns
- Laying foundations
- Creating perimeter framing and pan joists
- Placing concrete slabs
- Reinforcing with rebar
Skill Level Intermediate
1. Setting the Stage
4. Concrete Framing
5. Structural Slabs
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.